Volkswagen PHAETON - Service Manual download pdf (Page 44)

Automatic transmission

The selector lever block

The magnet for selector lever block N 110

is located on the selector lever frame below the

selector lever. It prevents the actuation of the

selector lever from the positions 'P' and 'N' when

the brake is not being applied.

How it works

Once the ignition has been turned on, the mag-

net for the selector lever block is put under cur-

rent by the control unit for automatic

transmission, thus blocking the selector lever. If

the control unit receives the signal 'brake

applied', it cuts off current to the magnet and the

selector lever can be moved.

Magnet for selector lever block

270_222

Control of

magnet N110

CAN-bus signal

'brake applied'

Effects of drop-out

If one of these two signals fails or if the magnet is

faulty, the selector lever can be moved out of 'P'

and 'N' without applying the brake — when the

ignition is turned on.

270_224

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 75 76

No comments

Volkswagen PHAETON - Service Manual Page 44